LeadLock PDF Print E-mail
LeadLockTM Topcoat is a high performance, water-based, acrylic, non-toxic, abuse- rust-, mildew-, fire- and chemical-resistant top coat that can be custom tinted almost any color. It function as a tough membrane that encloses lead-based paint surfaces.

It can be applied alone over intact surfaces, or over surfaces stabilized with PrepLess primer (formerly PSN-10/11) to form a global encasment system.

LeadLockTM Topcat is approved in all 50 states and has passed independent testing by third party accredited

laboratories, including ASTM E-1795, the standard for Liquid coating encapsulation product for leading paint in buildings.

LeadLockTM  Features:
  One coat-7mill dry film thickness (DFT)-(interior)
  Two coats-14 mil DFT (Exterior)
  Can be custom tinted almost any color
  Quick Dry Time
  Cures out completely in 7-10 days
  Extremely Tough, Durable and Flexible
  Mildew and Mold resistant
  Low voltage organtic Content (V.O.C.)
  No Offensive Odors

 
LeadLockTM is excellent for walls, ceilings, trim, ducts, pipes and all non-friction surfaces.  It can be used over treated or untreathed wood, stome metal, wallboard, sheet rock, cracked and painted plaster, stucco, masonry, concrete and various fibrous materials.


Technical Data
Solids by weight: 
62% 
Solids by volume: 55%
Weight per gallon: 11.1 lbs
Liquid appearance: Bright White with mild scent
Viscosity: 135 +/- 5KU
Drying time:
To Touch:1-4 Hours 
 Recoat After Dry To Touch 2-8 Hours
 Full Cure: 7-10 Days


Toxicological Reports states: "There is no toxicological basis for limiting occupancy of a dewlling unit, or restricting entry of any resident including pregnant women and children under six years of age, to dwelling units durring the application of your encapsulant."

Product Installation
 
  LeadLockTM Top Coat is ready to use and should not be diluted. 
  Apply by brush or roller, or airless sprayer.
  All surfaces must be clean, dry, and free of dirt, grease, oil, or other contaminants that would interfere with proper adhesion.
  Apply in temperatures between 50°F and 100°F.
  Can dry in 2-4 hours. Cool temperatures and high humiddty can affect dry and cure time.
  Follow manufacture's application guidelines.
  Easy to use and clean up is with water.

 

Coverage:
LeadLockTM coverage rate on a flat surface is:


  126 s.f./gallon for 7 mils DFT
  63 s.f./gallon for 14 mils DFT

Coverage varies depending upon the porosity and texture of the surfase being encased.

Spray Applications: Use self-cleaning reversible spray tip, size .019-.025 (.021 is most often used).
Brush: Use any nylon bristle brushes.
Roler: Use a 3/4 inch nap, may require two passes to obtain 7 Mill DFT.

Coverage varies depending upon the porosity and texture of the surfase being encased.Spray Applications: Use self-cleaning reversible spray tip, size .019-.025 (.021 is most often used).Brush: Use any nylon bristle brushes.Roler: Use a 3/4 inch nap, may require two passes to obtain 7 Mill DFT.